Author: Branden James

Come See Us At The Design 2 Part Show In Connecticut!

IMPM will be showcasing all of it’s prototyping and molding processes at the Design 2 Part show in Uncasville, Connecticut on April 24 & 25. The show will be held at the Mohegan Sun Exposition Center (1 Mohegan Sun Blvd,

Introducing the RSPro800 3D Printer!

IMPM has increased our 3D printing capabilities with the introduction of the RSPro800 SLA, 3D printer.  The new machine has a build envelope of 31.5 ” x 31.5″ x 21.7″, over double the size of our previous build envelope.  The

IMPM will be at the Design-2-Part and SEMA shows this fall!

Come chat with IMPM about your prototyping and molding needs at the Design-2-Part and SEMA shows! The Design-2-Part show will be October 10-11 at the Raleigh Convention Center located at 500 South Salisbury St, Raleigh, North Carolina 27601; IMPM will

Come See IMPM At The D2P Show In Atlanta!

Come see IMPM at the Design 2 Part show in Atlanta, Georgia on March 29th & 30th where we will be exhibiting our rapid prototyping and low volume production capabilities.  The D2P show is a great show to stay progressive

Polyester Resin (Fiberglass) Casting vs. Urethane Casting

In the product development world, many large prototypes are produced by casting a polyester resin with a filler for reinforcement, more commonly known as fiberglass.  This process is popular as materials are comparatively cheap and finished parts tend to have

Visit IMPM at the Design 2 Part show in Long Beach!

Come visit IMPM at the Design 2 Part show in Long Beach, California, on October 26th and 27th.  At booth 313, we will be showcasing all of our rapid prototyping, rapid tooling, and production capabilities.  The show will take place

What You Can Expect With Aluminum Tooling

Great read about the expectations of aluminum tooling for injection molding. Aluminum tooling is an under utilized method of mold making when it comes to injection molding.  IMPM has utilized aluminum tooling for over 20 years and has been able

Cast Urethane Applications: Medical Devices

Congratulations! You’ve spent months designing the next medical device that’s going to change the world (or more realistically a very specific community in need of a very specific type of medical attention) and now you’re ready to test your design.

Design 2 Part Show!

  Come see us at the Design 2 Part show in Marlborough, MA, at the Royal Plaza Trade Center from September 30th- October 1st.  We will be set  up at booth number 516.  Register now for free admission and check

Come see us at the Design 2 Part and Design & Manufacturing Midwest expos!

IMPM will be set up at Booth 561 at the Design 2 Part show in Marlborough, Massachusetts at the Royal Plaza Trade Center.  Shows dates are Wednesday, October 1st from 9 a.m.- 4 p.m., and Thursday, October 2nd from 9